GOLF CLUB & COUNTRY CLUB SUPPLY
Outdoor Furniture for Golf Clubs Johor Bahru: Hardwood Clubhouse & Course Furniture That Matches the Prestige of Your Club
Table of Contents
- Overview
- Quick Facts
- Furniture Types for Golf Clubs
- Wood Species
- Weather & UV Performance
- Our Supply Process
- Care & Maintenance
- Frequently Asked Questions
- Get a Quote
- Similar Topics
- References
Overview: Why Golf Clubs in Johor Bahru Choose Hardwood Outdoor Furniture
Johor Bahru is home to some of Malaysia’s most prestigious golf and country clubs — Horizon Hills Golf & Country Club, Pulai Springs Resort Golf, Royal Johor Country Club, Tanjong Puteri Golf Resort, and the internationally renowned venues along Desaru Coast. These clubs serve a discerning membership that includes senior executives, property investors, and visiting corporate guests from Singapore and beyond. Every detail of the club experience — from the quality of the fairway turf to the furniture on the clubhouse terrace — signals the club’s standard and reinforces the value of membership.
Plastic garden furniture on a championship clubhouse terrace is incongruous. Aluminium furniture, while durable, lacks the warmth and prestige that members expect. Custom solid hardwood outdoor furniture — Merbau or Chengal dining chairs, teak-finished side tables, heavy benches at each tee shelter, and a timber bar counter on the 19th hole terrace — delivers the quality and permanence that golf club facilities demand. At Oriental Allure Design, we supply and install custom hardwood outdoor furniture for golf clubs, country clubs, and sports resorts across Johor Bahru from our Masai workshop.
Quick Facts
- Products: Clubhouse terrace chairs & tables, tee box benches, halfway house furniture, course-side shelters, locker room benches, outdoor bar counters
- Primary Species: Merbau, Chengal, Balau (outdoor); Nyatoh, Kempas (indoor/covered)
- Finish: UV-resistant exterior oil or semi-gloss varnish; club branding options available
- MOQ: 10 pieces per furniture type for custom orders; single-piece bespoke items available
- Lead Time: 4–8 weeks depending on volume and complexity
- Delivery: Full delivery and installation service to all JB golf clubs
- Contact: +60 16-717 9573 (WhatsApp)
Workshop & Service Area
Oriental Allure Design operates from 1, Jalan Penaga 1, Kawasan Perindustrian Kota Putri, 81750 Masai, Johor. We supply golf clubs throughout Johor Bahru, Desaru Coast, Kota Tinggi, Kulai, Batu Pahat, and across wider Johor state. WhatsApp +60 16-717 9573 to discuss your club’s furniture requirements.
Hardwood Furniture Types for Golf Clubs
A typical 18-hole golf club has multiple distinct furniture environments, each with specific functional and aesthetic requirements. We supply custom hardwood furniture for all of them.
- Clubhouse Terrace Dining Set: The most visible furniture at any golf club — the terrace dining arrangement where members enjoy post-round meals, Sunday brunches, and corporate entertainment. We fabricate heavy solid hardwood dining chairs (armchairs and side chairs) with weatherproof woven or cushioned seats, matching rectangular or round dining tables with centre umbrella hole options, and side serving tables. Standard table sizes: 900×900 mm (4-seater) and 1,600×900 mm (6-seater). All designed for full outdoor exposure with UV-resistant oil finish.
- Tee Box Shelter Bench: The bench seat within each tee shelter — the resting point for golfers waiting to play and the moment where the quality of course furniture is most closely observed. A solid hardwood bench (typically 1,800 mm long × 450 mm seat depth) with a slatted seat, solid backrest, and the club’s engraved logo in the backrest centre panel creates a premium first-tee impression. We can supply matching benches for all 18 tees from a single production run, ensuring total consistency across the course.
- Halfway House & Drinks Kiosk Furniture: The bar stools, counter-height tables, and bench seating at the 9th/10th hole refreshment stop. High-traffic, casual use — furniture needs to be extremely robust and stackable for storage. We supply heavy-section hardwood bar stools (seat height 650–750 mm) and counter tables that withstand the daily demands of a busy halfway house operation.
- Locker Room Benches: Indoor benches for the changing room — long benches in front of locker rows, typically 1,800–2,400 mm long in solid hardwood with a simple slatted or solid seat. The locker room bench is a daily touchpoint for every member — a beautifully crafted hardwood bench in a quality timber (Nyatoh or American White Oak for interior use) signals the club’s commitment to quality in every detail.
- Outdoor Bar Counter: The 19th hole bar counter and terrace service counter — a custom hardwood bar top (solid 60–80 mm thick slab or butcher-block construction) on a structural frame. Can incorporate built-in drainage channels, ice well cutouts, and bottle shelves. A bespoke hardwood bar counter is a focal design element of the clubhouse alfresco area.
Recommended Wood Species for Golf Club Furniture
Golf club outdoor furniture must perform in a demanding environment: daily UV exposure on open fairways and terraces, monsoon rain, frequent cleaning with commercial detergents, heavy daily use by multiple users, and the expectation of a premium aesthetic maintained over a 10+ year asset life. We specify: Chengal for tee box benches and any furniture on the course itself (full weather exposure, Class 1 durability required, can withstand decades without treatment); Merbau for clubhouse terrace dining furniture (Class 2 durability, excellent appearance, more cost-effective than Chengal for large-volume terrace sets); Balau for heavy structural elements like outdoor bar counter frames and large dining table bases; Nyatoh or American White Oak for locker room benches and any covered indoor furniture where aesthetic uniformity and fine finishing take priority over weather resistance.
Weather & UV Performance in JB’s Golf Course Environment
Golf course furniture in Johor Bahru faces one of the most demanding outdoor environments for timber: full equatorial sun on open fairways, reflected UV from the fairway surface, daily dew condensation in the early morning, and weekly pressure washing during course maintenance. We address this through three measures. First, species selection — only Class 1 or 2 hardwoods for all course furniture; no softwood or low-durability timber regardless of cost pressure. Second, finish specification — all course furniture receives a UV-absorbing penetrating oil base coat plus one coat of UV-resistant semi-gloss topcoat, applied in four coats total before delivery. This finish system is specifically selected for its ability to be topped-up in situ during annual maintenance without full stripping. Third, design details — all furniture is designed with drainage in mind: slatted seats with 8–10 mm gaps, no horizontal surfaces that pool water, and all joint lines oriented to shed rather than trap moisture.
Our Golf Club Supply Process
- Site Visit: We visit the club to photograph existing furniture, understand the club’s aesthetic brief, measure key locations (terrace, tee shelters, halfway house), and discuss volume requirements with the club manager or F&B/operations team.
- Design Proposal: We prepare 2–3 design options per furniture type with timber species, finish colour, and indicative unit pricing. For significant orders, we provide a physical sample panel showing the proposed species and finish.
- Sampling (optional): For orders over 50 pieces, we fabricate a single sample chair or bench for club approval before full production run. This eliminates any risk of aesthetic mismatch on large orders.
- Production: Full production run in our Masai workshop. All pieces from the same batch are finished in the same session to ensure colour consistency across the entire order.
- Delivery & Installation: We deliver and position all furniture as directed by the club’s operations team. We provide a maintenance kit (oil, brush, cloth) and a written maintenance schedule for club staff on every order.
Care & Maintenance for Golf Club Furniture
Golf clubs should include outdoor furniture maintenance in their annual grounds maintenance schedule. Twice-yearly application of teak oil to all outdoor hardwood pieces — ideally in April (before the southwest monsoon) and October (after the northeast monsoon) — will maintain the timber’s colour and water resistance. All furniture should be pressure-washed at low pressure (maximum 50 bar, wide fan nozzle) with mild detergent every 3 months to remove algae and dirt, and allowed to dry completely before oil application. Any piece showing significant checking or cracking should be sanded and refinished immediately before moisture penetration accelerates the damage.
Frequently Asked Questions
Can you engrave our club logo on the furniture?
Yes — we offer CNC-routed logo engraving on chair back rails, bench back panels, and table aprons. Logos are provided by the club in DXF or SVG vector format and routed to a depth of 3–5 mm. The routed area can be left as natural timber, stained to a contrasting dark colour, or painted in the club’s corporate colours. Logo engraving adds a distinctive branded identity to the furniture and is particularly effective on tee box benches where the engraved logo is at eye level for every golfer addressing the tee.
How many dining sets are typically needed for a clubhouse terrace?
A standard Malaysian golf club terrace of 200–300 m² typically accommodates 20–35 dining tables with 80–140 chairs, plus 4–8 side tables for drinks service. We work with your F&B manager to optimise the layout for your specific terrace dimensions and member capacity. For renovation projects, we can survey the existing terrace and prepare a furniture layout plan as part of our quotation service — free of charge for orders over RM 30,000.
Do you supply matching indoor and outdoor furniture for a seamless look?
Yes. We supply both indoor (covered) and outdoor (exposed) furniture ranges using the same design language and species, with different finish specifications — exterior oil for outdoor pieces, interior varnish or hardwax oil for indoor pieces. This creates a seamless visual transition between the air-conditioned dining room and the outdoor terrace — a design approach that aligns with the premium interior standards of Johor Bahru’s top golf clubs.
What is the minimum order value for a golf club furniture supply?
There is no strict minimum order value. We supply single bespoke pieces (e.g., a custom boardroom table for the club’s meeting room) as well as large-volume terrace sets. However, for custom production runs of chairs and benches, a minimum of 10 identical pieces makes the per-unit pricing most competitive. For very large orders (full clubhouse renovation, 100+ pieces), we provide volume pricing and a dedicated project manager to coordinate delivery phasing if the club needs to remain operational during the furniture upgrade.
Supply Your Golf Club with Custom Hardwood Furniture
Oriental Allure Design supplies custom hardwood outdoor and indoor furniture to golf clubs, country clubs, and sports resorts across Johor Bahru. WhatsApp us to arrange a site visit and design consultation.
📱 WhatsApp: +60 16-717 9573
📍 1, Jalan Penaga 1, Kawasan Perindustrian Kota Putri, 81750 Masai, Johor
🌐 facebook.com/oadpro
Similar Topics
- Hardwood Outdoor Furniture for 5-Star Hotels & Resorts
- Outdoor Furniture Johor Bahru
- Hardwood Timber Decking Johor Bahru
References
- Oriental Allure Design — Custom Hardwood Furniture, Masai Johor
- Malaysian Timber Industry Board (MTIB)